View EL1517_177829.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
EL1517
Data Sheet September 9, 2004 FN7425.1
xDSL Differential Line Driver
The EL1517 is a dual operational amplifier designed for VDSL and ADSL line driving in DMT based solutions. This device features a high drive capability of 250mA while consuming only 7mA of supply current per amplifier and operating from a single 5V to 12V supply. This driver achieves a typical distortion of -80dBc, at 150kHz into a 25 load. The EL1517 is available in the industry-standard 8-pin SO, the thermally-enhanced 16-pin QFN, and 10-pin HMSOP packages. All are specified for operation over the full -40C to +85C temperature range. The 16-pin QFN and 10-pin HMSOP package options have control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. The EL1517 is ideal for ADSL, SDSL, HDSL2 and VDSL line driving applications.
Features
* Drives up to 250mA from a +12V supply * 18VP-P differential output drive into 50 * 20VP-P differential output drive into 100 * -80dBc typical driver output distortion at full output at 150kHz * -75dBc typical driver output distortion at 3.75MHz * -60dBc typical driver output distortion at 8MHz * -50dBc typical driver output distortion at 16MHz * Low quiescent current of 7mA per amplifier * 200MHz bandwidth
Applications
* VDSL line drivers * ADSL full rate CPE line driving
Ordering Information
PART NUMBER EL1517IS EL1517IS-T7 EL1517IS-T13 EL1517IL EL1517IL-T7 EL1517IL-T13 EL1517IYE EL1517IYE-T7 EL1517IYE-T13 PACKAGE 8-Pin SO 8-Pin SO 8-Pin SO 16-Pin QFN 16-Pin QFN 16-Pin QFN 10-Pin HMSOP 10-Pin HMSOP 10-Pin HMSOP TAPE & REEL 7" 13" 7" 13" 7" 13" PKG. DWG. # MDP0027 MDP0027 MDP0027 MDP0046 MDP0046 MDP0046 MDP0050 MDP0050 MDP0050
* G.SHDSL, HDSL2 line drivers * HomePlug networking drivers
Get Full Datasheet
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners.
EL1517 Pinouts
EL1517 (8-PIN SO) TOP VIEW
OUTA 1 INA- 2 INA+ 3 GND 4 + + 8 VS 7 OUTB 6 INB5 INB+ NC 1 INA- 2 INA+ 3 VS-*
EL1517 (16-PIN QFN) TOP VIEW
13 OUTB 12 NC 11 INB10 INB+ 9 C1 NC 5 NC 6 VS- 7 C0 8 16 OUTA 14 VS+ 15 NC
EL1517 (10-PIN HMSOP) TOP VIEW
VS+ 1 NC 2 OUTA 3 INA- 4 INA+ 5 GND* 10 OUTB 9 INB8 INB+ 7 C1 6 C0
GND 4
THERMAL PAD MUST BE CONNECTED TO NEGATIVE SUPPLY: VS-. QFN PACKAGE CAN BE USED IN DUAL SUPPLY APPLICATIONS.
THERMAL PAD MUST BE CONNECTED TO GROUND. PAD IS CONNECTED INTERNALLY TO VS- AND THUS HMSOP PACKAGE CAN ONLY BE USED IN SINGLE SUPPLY APPLICATIONS.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 2

▲Up To Search▲

Price & Availability of EL1517

	To Download EL1517 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .